Product Overview

The Double Wire Stripper Machine is designed for precise stripping of short-length cables in wire harness production environments. It processes two wires simultaneously in a single cycle, helping reduce manual handling during repetitive stripping operations.

Key Features

Precision Tolerance: Stripping accuracy maintained within ±0.1 mm under standard line speeds.
Core Protection: Independent blade adjustment prevents conductor nicking on fine wires (applicable down to 32 AWG).
Thermal & Mechanical Stability: Micro-gap consistency locked in for 8-hour continuous shifts.
Advanced Feeding: Servo-controlled feeding mechanics eliminate length variance during synchronized dual-wire operations.

Applications

Engineered for wire lengths down to 25mm without slippage, maximizing yield on ultra-short harness processing.
Processes two wires per cycle, cutting handling time by 50% on manual assembly lines.
Full-strip, half-strip, and multi-step stripping configurable via intuitive HMI.
High-density automotive jumpers, USB harnesses, battery leads, sensor cables, and compact connector assemblies.

technical specification

Weight	28KG
Power	300W
Electrical connection	110V/220V 50HZ/60HZ
Operation interface	4.3 inch Chinese and English switching touch screen display
Machine dimension	460470325mm
Wire length range	1～9999mm
Strip length	Front end:0-30;rear end:0-15mm
Length accuracy	± (0.002xL)mm
Intermediate peeling times	16 times
Wire cross section	Double wire 0.1～2.5mm²; Single wire .1～4mm²
Max conduit inside diameter	￠6mm
Wire material	PVC,Teflon,Braided,Fiberglass wire
Blade material	hard tungsten steel
Transport speed	(L=100MM piece/hour) 5000-10000 pieces
Driving mode	four-wheel drive (silent hybrid stepper motor, 0.1mm forward per step)

Production Efficiency

Processes up to 4,500 wires per hour depending on stripping length and cable type
1 operator can manage 2 machines simultaneously during standard production shifts.
Compact modular layout optimizes floor-space utilization in high-density lean cells.
Job changeover can typically be completed within 3 minutes using stored programs

OEM Customization

Custom blade geometry and dedicated fixtures available for complex insulation materials (e.g., Teflon, silicone) and non-standard wire shapes.
Multi-voltage configurations factory-set for North America (110V), Europe (230V), and Southeast Asia (220V).
Private label options and localized UI branding available for regional equipment distributors.
Annual production capacity of 12,000–20,000 units guarantees stable lead times for high-volume OEM sourcing contracts.

About Us

We specialize in advanced wire stripping, cutting, and terminal crimping automation solutions. More than just building machines, we help the global wire harness industry improve efficiency, increase production capacity, and scale with confidence.

About us